Weight: Front hub 110g, Rear hub 245g
Varies depending on bearing, endcap, and freehub spec
Driver: Shimano HG, SRAM HG or XD-R, or Campy.
6 degree engagement, 3 pawl freehub, 60 point drivering
- Front Axles: QR 100mm, 9x100mm, 12x100mm, 15x100mm
- Rear Axles: QR 135mm, 10x135mm, 12x142mm
- Hole Count: 24, 28, or 32-hole
Featuring all of the advantages of the Torch freehub -low drag, low weight, and the ultimate in freehub compatibility- tied into a traditional, "Classic" hub.
The Torch road hubs use the same drive ring and pawls as the mountain hubs. However, we reduced the pawl count to 3 instead of 6 for lower drag and weight while still achieving an industry leading (for road hubs) 6 degree engagement. Relocated bearings, and a new freehub seal reduce freehub drag while coasting.
The Torch road hubs now feature custom Teflon contact seals for the end caps, which we manufacture in-house. They fully seal the hubs from mud and water - tight enough for a muddy CX season, but smooth enough for drag-free road miles.